Muncie PTO
Factory
Direct, Your Power Take-Off Store
CLICK HERE
PTO
WORK SHEET CLICK HERE
 |
FA62
AND FA64 SERIES PTO Muncie's New
FA62 and FA64 Series Muncie PTO includes the design features needed to power your
application accessories. Whether your chassis choice is gas or diesel,
2-wheel or 4-wheel drive. Muncie has the greatest selection of PTO and
Hydraulic System Components to maintain your
Some of the features of the FA Series are:
Electrically actuated internal wet disc
clutch design.
Robust design utilizing maximum transmission
PTO Torque Rating of 170 lb.ft. intermittent, 120 lb.ft. continuous.
PTO output shaft speed = 134% of engine RPM.
SAE direct mount pump adaptation, standard.
Numerous selection of direct mount hydraulic
pumps providing flows from 2.6 to 30 GPM.
Optional 1-1/4" keyed output shaft for remote
mounted non-hydraulic accessories (available on 4x2 only). |
 |
SH
SERIES PTO
The Muncie SH Series PTO provides a leap in
capability. More power in a compact package. SH is the perfect PTO for
tough applications with limited space, high torque, high volume and high
priority jobs.
SH Series bridges the gap between standard 6
bolt and 8 bolt PTOs. SH has 5 internal gear ratios with torque
capabilities from 325 lb.ft. up to 400 lb.ft., and is priced to give more
power per dollar. Other features also include oversized piston and high
contact gear design, which provide longer life on tough applications, air
shift or electric/air activation, standard 1 1/4" round output shaft or
other optional SAE options. |
 |
TG
SERIES POWERFLEX™ PTO
The TG Powerflex™ PTO is the workhorse of the
Muncie line. The TG’s flexible design permits a wide variety of
PTO/transmission applications with a simple inventory.
The TG has the speed and torque range of 10
PTOs all in one housing. It is possible to assemble PTOs that cover
capacities from 33 to 54 HP @ 1000 RPM and torque from 175 to 285 lb.ft.
Maximum recommended output speed is mounting. Accommodating most
transmissions is possible with more than 50 available input gears. There are
output shaft options to allow direct coupling of all popular hydraulic pumps
used on trucks. Shift options include cable, lever, air, electric/air,
Lectra-shift, hydraulic, and constant mesh. The Muncie Powerflex™ is
available in ten different speed ratios. Combine the list of options and the
TG Series offers more than 100,000 different combinations - all from the
same TG Series PTO.
|
 |
82
SERIES 8 BOLT PTO
• Two Gear – Single Speed
• High Torque – High HP
A heavy duty, cast iron PTO for applications
on Jet Aircraft Refueling Pumps, High HP Air Compressors, Large Garbage
Packers, Construction Cranes. Torque rating (intermittent) to 500 lb.ft.
Horsepower rating (intermittent) to 95 HP. Standard model has lever shift
and 1-1/2"—10T spline output shaft complete with companion flange adaptable
to Spicer 1410 Series driveline. Also available in SAE B and SAE C pump
mounts, air shift, pressure lube, and four assembly arrangements. Positive
indicator switch. Five different speed ratios; seven different gear pitches. |
|
