Fax 515-262-3095    800-577-2899   515-262-2858

Mobile I Home | Blowers | PTO's | Fill-Rite | Hydraulics | Compressors | Site Map |Power Packs | PTO Work Sheet | Catalog

  Contact Factory Direct  

HYDRAULIC RESERVOIR

50 Gallon Reservoir
(Upright or Side Mount)

muncie reservoir

Foam-retarding diffuser built into reservoir prevents pressure build-up, foaming or oil blow-over.  Breather filler cap with built-in 40 micron air filter helps keep system clean.  All Hydraulic Reservoir porting is pipe-threaded.  All parts in the system are non-corrosive and require no painting.  Two 2" N.P.T. type aluminum work ports are located on the bottom of the reservoir.

Super strong one piece polyethylene reservoirs

One piece molding means no seams to leak, no rust and no welding slag to breed contamination.  The 50 gallon reservoir is available upright or side mount.  Empty weight (without hardware) is only 32 lbs., yet reservoirs have more impact strength than a comparable steel unit.

Hydraulic Reservoirs carry a lifetime warranty when mounted on the original chassis. All system hoses, hardware, and the reservoir can be shipped via UPS.

Side mount comes standard with stainless steel straps and aluminum mounting brackets.  Installs in half the time of conventional systems.

Hydraulic reservior comes standard with a five inch sight gauge with thermometer, as well as an additional pot available for an optional temperature sensing switch.
side mount reservoir

Side Mount Reservoir

 

35 GALLON RESERVOIR

Designed to be the easiest and most quickly installed reservoir of its size.  For use on applications such as: Bump Trucks, Central Hydraulic Systems, Tow Vehicles, Aerial Devices and Platform Utility Equipment.
bulletLifetime warranty
bulletContaminant free
bullet3" sight gauge with thermometer
bulletMuncie's patented return line diffuser
bulletRear accessory ports
bulletExtremely lightweight (reservoir weighs 25 lbs)
bulletOptional return line filter (diffuser not used with filter)

 

75 GALLON RESERVOIR

The upright 75 gallon (at 80% full point. Actual holding capacity is 90 gallons.)  polyethylene reservoir provides a better safety head on trailers using larger cylinders. Empty weight (without the hardware) only 48 lbs.   
Two 2" N.P.T. type aluminum works ports are located on the bottom of the reservoir.  

 

hydraulic reservoirs

Aluminum and Steel Reservoirs

As a complement to our Polyethylene Reservoirs, We have our aluminum and steel models for those continuous-duty applications where metal tanks are preferred.  For the high-profile fleets, the pleasing aesthetics of the aluminum models are often the choice.  SIZES- 50 & 70 Gallon Upright and Side Mount

 

15, 25 & 35 Gallon Steel Side Mount Reservoir are available

 

click below for more info
Dump Pumps Wet Line Systems
Snow & Ice Control Systems Gear Pumps
Hydraulic Control Valves Refuse Industry Pumps
Reservoirs Hydrapak

  (link)

5585 NE 16th Street, Des Moines, Iowa  50313

click here for free classified

Send e mail to: rhackley@senecatank.com with questions or comments about this web site.
Last modified: September 03, 2010