HEAVY DUTY PUMPS

LIVE PAK SYSTEM

The MLS Series M Live Pak Pump System is specifically designed for start and stop residential refuse handling.

Maximum route efficiency is accomplished without fear of excessive hydraulic flow, shutdown or heat buildup, yet the Live Pak still prevents system overspeeds without interrupting work cycles. Moreover, the Live Pak may be put to work on new equipment or can give any old equipment new life. The Live Pak works well with all existing designs.

The Live Pak is available in six different pump sizes and controlled flows up to 60 GPM.
(Sizes ranging from 22-44 GPM @ 1000 RPM).

POWR-PRO PUMP

The Powr-Pro Pump System is an on-demand live power hydraulic system ready for work with a single flip of the switch. The pump can be driven by either the engine crankshaft or flywheel PTO and contains no clutches or gears to engage or disengage, thus providing increased productivity for all solid waste packers and other mobile power applications. The Powr-Pro Pump System carries a full Two Year Warranty.

• All cast iron, three piece construction
• System matched components
• Speeds to 3000 RPM
• Pressures to 3000 PSI
• 7 standard sizes: 19, 23, 25, 27, 31, 35, 40 GPM*

*GPM @ 1000 RPM

POWER-MISER SYSTEM

Crankshaft or PTO Driven

Provides instant auxiliary power for Refuse Packers, Snow Removal/Ice Control Vehicles and many other mobile power applications.

EASY, DASH-MOUNTED CONTROL by Electric Switch or Manual Air Valve.

LOWER OPERATING COSTS. When the Power-Miser is operated in the Off Mode, only enough oil flow to lubricate the pump is permitted. The Off Mode requires less horsepower, increasing fuel economy. For continuous duty operation, Power-Miser offers a practical alternative to the expense of clutches and their maintenance.

The basic Power-Miser System is comprised of three elements: a Pump, a Power-Miser Valve, and a Bleed Off Valve. Each has been specially designed for Power-Miser operation.